Yes, and this is one of the most common projects we do in Pueblo. Bessemer and Northside steelworker bungalows from the 1920s-1940s have steel casements in masonry openings that don't match any modern standard window size. We field-measure every opening and order Andersen 100 Series in custom widths to drop into the existing brick pockets without rebuilding the masonry around them. That preserves the home's architectural character (and resale value) while finally getting modern thermal performance into the envelope.

Pueblo sits at 4,695 feet, nearly 2,000 feet lower than Colorado Springs, with summer highs regularly above 95 degrees. Solar Heat Gain Coefficient (SHGC) becomes the controlling spec here, not just U-factor. We push lower-SHGC Low-E coatings on south and west elevations to cut cooling load, while still hitting the ENERGY STAR Version 7.0 Northern Zone U-factor target of 0.22 or better for the cold January snaps.

Yes, dramatically. Pueblo sits at the south end of the Front Range wind corridor with sustained 20-30 mph winds and spring gusts that have hit 70+ mph at the airport. Old aluminum-frame double-hungs from the 1950s-1960s Aberdeen and Belmont housing stock have gaps at every meeting rail and weep hole. Modern compression seals on Andersen 100 or 400 Series shut that infiltration down. Most homeowners notice the indoor air quality change within the first week.

A 12-15 window Pueblo project on a 1,400-1,800 sq ft Aberdeen or Belmont ranch usually lands somewhere in the $9,000-$15,000 range with Andersen 100 Series and Low-E glass. Larger Mesa Junction or Northside homes with 18-25 windows run higher. Pueblo home values mean replacement carries outsized impact per dollar spent. Every quote is custom; we measure before quoting.

Yes. The Pueblo Historic District around the downtown core has preservation considerations, and we work within those guidelines. For Victorian-era properties we lean on Andersen E-Series with simulated divided lites that match the original sightlines while delivering full modern Low-E performance. We handle the design review submission as part of the project.

We serve all of Pueblo plus Pueblo West, Beulah, Rye, Colorado City, and the northern Huerfano County area. Pueblo is 45 miles south of our Colorado Springs shop, a 45-55 minute drive, which we batch with other south-of-Springs work to keep travel cost reasonable.

For homes replacing original single-pane glass or 1960s-1980s aluminum double-pane, the typical summer cooling savings is 25-35%. The summer heat gain through old clear glass on south and west elevations is the largest single cooling load in a Pueblo home. SmartSun-class Low-E with low SHGC on those elevations is what closes that gap.